Acrylic Sealant
0102030405
gap crack filler acrylic silicone sealant for room caulking
Features
• Good compatibility with most of neutral silicone adhesive
• Single component, easy to use
• Good adhesion
• Large stretch ability ,don’t be breaking after stretch
• Forming fast for construction to save time
Using method
1.Clean the surface and make sure there's no oil stains and ash left.
2.Cut open the orifice and fit the nozzle on squeeze the acrylic adhesive out with a gears.
3.Put material to glue face
Notice
1.All surfaces must be clean and dry.
2.Users who use our acrylic sealant for the first time should do the glue and material compatibility test
WARNING
1.Keep the acrylic sealant out of reach of children.
2.Ensure that the area where the sealant is being applied is well-ventilated.
3.Avoid contact with eyes and skin, in case that happens,should wash with clean water immediately, then turn to the doctor for help.
4.Consumers should have a trial test before operation mean-while follow the instructions stated above to avoid personal danger or loss.
Forbidden range
1.Copper, brass and copper-containing alloys, magnesium and other reactive metals
2.Materials such as marble, concrete, and ferric carbide matrix
3.Mirrored glass or coated glass
4.Polypropylene, polyethylene, PTFE and other materials
5.Move a connection that is greater than 25% of the seam width
6.Structural or non-structural adhesive assembly of metal and glass between glass curtain walls
7.There is abrasion and the place where the oil seeps out
8.The surface temperature of the substrate exceeds 40°C or below 5°C
Packing
• 300ml/piece, 24pieces/carton,43mm bottle diameter
Storage
•Store cartridge in dry and cool place.
Color
White
Shelf life
• 12 months
1.Wood and other dry wall
2.Stone, brick, concrete, stucco and most plastics composite materials
3.Glass
4.Leather
|
Density |
1.6g/ml |
|
Color |
White |
|
Skin time(Hour) |
4 Hours |
|
Tensile Strength(Mpa) |
1.4Mpa |
|
Ultimate Tensile Strength(%) |
430% |
|
Shrinking percentage(%) |
8% |
|
Hardness (Shore A) |
56 |
|
Working Temperate(℃) |
0 - 60℃ |
|
Surface Drying Time(min) |
5 Mins |
|
Full Cure Time(Hours) |
About 72 Hours |
|
Shelf Life(Month) |
12 Months |
