Inquiry
Form loading...
What is neutral silicone sealant

Company News

What is neutral silicone sealant

2024-10-21 08:32

    Neutral silicone sealant.

    a

    Introduction:

    ‌    Neutral silicone adhesive is a kind of multi-purpose building material, widely used in electronic parts fixing, circuit board bonding, glass, lighting, building materials and other fields. ‌

    Neutral silicone adhesive has excellent adhesion and sealing performance, and has good bonding strength and sealing performance for most materials, which makes it excellent in electronic parts fixing and circuit board bonding. In addition, neutral silicone adhesive also has good weather resistance, including ultraviolet resistance, ozone resistance, waterproof and other characteristics, making it an ideal choice for building assembly weather-resistant sealant. 

    Neutral silicone rubber not only has good sealing and cohesiveness, but also moisture, electricity, and also has good high temperature and low temperature resistance, the highest tolerable temperature is 250 degrees, the lowest tolerable temperature is negative 60 degrees. This material can generally be used for twenty to thirty years or so, at the same time, it is not easy to yellow, oil seepage and other phenomena, with a long service life ‌

    1.Overview

    Features:

    • Quick dry and extreme strength

    • Best weather resistance and tensile resistance

    • Big curtain wall work special

    • Vibration resistance

    • Moisture proof

    • Adapt to large changes in hot and cold


    Using method:

    1. Clean the surface and make sure there's no oil stains and ash left.

    2. Cut open the orifice and fit the nozzle on squeeze the adhesive out with a gears.

    Notice:

    1.All surfaces must be clean and dry.

    2.This product should not be used for structural assembly, the areas that may contain alkaline substance like marble and granite, as well as the surfaces that are frosty, humid or with bad ventilation condition and may contain transudatory grease, plasticizer.


    Warning:

    1.Keep out of reach of children.

    2.Keep the package well sealed, make sure the operation site with good ventilation condition.

    3.Avoid contact with eyes and skin, in case that happens, should wash with clean water immediately, then turn to the doctor for help.

    4.Consumers should have a trial test before operation mean-while follow the instructions stated above to avoid personal danger or loss.


    Forbidden range

    1.Buried in the underground interface, long-term water and tight ventilation

    2.Metal copper, mirror and meta! coating materials

    3. Material containing oil or exudates

    4.Material surface temperature too high (> 40 ℃) or too low (< 5℃)


    Packing:

    • 300ml/piece, 24pieces/carton,43mm bottle diameter

    Storage

    •Store cartridge in dry and cool place.

    Color

    White/Black/Transparent/Custom

    Shelf life

    • 12 months 

    2. Application

    Indoor floor, kitchen& toilet dado, corridor, gap around the sink,

    bc

    3. Technical Date

    CAS NO.

    63148-60-7

    Other name

    Glass sealant/Structural sealant

    Density

    1.4g/ml

    Color

    White/Black/Gray/Brown/Custom

    Skin time(Hour)

    4 Hours

    Tensile Strength(Mpa)

    2.2Mpa

    Ultimate Tensile Strength(%)

    140%

    Shrinking percentage(%)

    6%

    Hardness (Shore A)

    46

    Working Temperate(℃)

    0 - 80℃

    Surface Drying Time(min)

    5 Mins

    Full Cure Time(Hours)

    48-72 Hours

    Shelf Life(Month)

    12 Months

    4. Packing&Delivery

    efd
    hig