Acid Silicone Sealant
01
Bathroom mildew proof and waterproof silicone sealant
Features
• Mildew proof and waterproof
• High brightness
• Fast dry
• Weather resistance and temperature resistance
Using method
1. Clean the surface and make sure there's no oil stains and ash left.
2.Cut open the orifice and fit the nozzle on squeeze the adhesive out with a gears.
Notice
1.All surfaces must be clean and dry.
2.Users who use our glass glue for the first time should do the glue and material compatibility test
WARNING
1.Keep out of children's reach.
2.Make sure the operation site has adequate ventilation and keep the item tightly packed.
3.Prevent contact with eyes and skin; if it occurs, wash with clean water right once and seek medical attention.
4.In order to prevent injury or loss to themselves, consumers should conduct a trial test prior to operation while according to the above guidelines.
Forbidden range
1.Copper, magnesium, other reactive metals, brass, and alloys containing copper.
2.Materials like ferric carbide matrix, marble, and concrete .
3.Coated or mirrored glass.
4.Materials such as polypropylene, polyethylene, and PTFE .
5.Shift a connection wider than twenty-five percent of the seam.
6.Adhesive arrangement of metal and glass, either structural or non-structural, positioned between glass curtain walls.
7.There is wear and tear and the oil seeps out.
8.The substrate's surface temperature is higher than 40°C or lower than 5°C.
Packing
• 300ml/piece, 24pieces/carton,43mm bottle diameter
Storage
•Store cartridge in dry and cool place.
Color
White/Black/Transparent/Custom
Shelf life
• 12 months
1、Window and door sealing
2、Wall panel bonding and sealing
3、Kitchen and bathroom sealing
4、Interior decoration work
CAS NO. |
63148-60-7 |
Other name |
Glass sealant/Structural sealant |
Density |
1.4g/ml |
Color |
White/Black/Gray/Brown/Custom |
Skin time(Hour) |
4 Hours |
Tensile Strength(Mpa) |
1.2Mpa |
Ultimate Tensile Strength(%) |
200% |
Shrinking percentage(%) |
12% |
Hardness (Shore A) |
48 |
Working Temperate(℃) |
5 - 40℃ |
Surface Drying Time(min) |
5 Mins |
Full Cure Time(Hours) |
48-72 Hours |
Shelf Life(Month) |
12 Months |
