01
OEM extreme strength Nail Free Glue fast dry Liquid Nails
Features
• Fast dry and bond speed.
• Extreme strength with super adhesion
• Good flexibility and weather resistance
• Non-toxic ,low-corrosive and environmental friendly
• Widely application and usage
• Can bond almost all materials
Using method
1. Clean the surface and make sure there's no oil stains and ash left.
2.Cut open the orifice and fit the nozzle on squeeze the adhesive out with a gears.
2.1-Bonding process for light materials
(Applicable to light materials and bonding places with light bearing pressure) Squeeze the adhesive out and gelatinize in a"Z"shape with a 40cm distance press the materials tightly and then take them apart for several minutes and squeeze them again.
2.2-Bonding process for heavy materials
Squeeze the adhesive out and gelatinize as described above then fix with clamp,iron nails, screws and other instruments; remove the clamp after adhesive dried(about24 hours). Sticking positions can be adjusted within20 min, adhesiveness will be stronger after 2-3days optimum efficiency will be achieved after 7 days.
Notice
1.Nails free glue can be removed by turpentine.
2.After dry, residue can be removed by scraper.
3.This product can be used in floor laying.
4.Bonding strength will be weakened at high temperature.(Avoid bonding metal exposed in sunlight for long time)
WARNING
1.Application should be at a well-ventilated place.
2.Stay away from fire or high temperature,products should be stored at a cool and dry place.
3.Pay attention to cause water source pollution.
4.Discard the products only when it dries out.
Packing
• 300ml/piece, 24pieces/carton,43mm bottle diameter
• 310ml/piece, 24pieces/carton,45mm bottle diameter
Storage
• Store in the original unopened package in a dry and shady place below 25°c
Color
White/Beige/Gray/Custom
Shelf life
• 12 months
1、Wood tiles, door frames
2、Wall coverings made of wood, plaster,cardboard, PVC board.
3、Decorative tiles and elements made of polystyrene, polyurethane rigid-foam and gypsum
4、Sound insulation and fiber boards
5、WPC, SPC, plywood, mirror
6、Interior decoration
CAS NO. |
216597-12-5 |
Other name |
Construction Adhesive/Nail free glue/ No more nail |
Density |
1.13 g/ml |
Hardness (HB) |
58 HB |
Viscosity(MPa.s) |
60000 MPa.s |
Peel strength (N) |
96.28 N |
Shear strength (MPa) |
0.773 MPa |
Solid Content (%) |
77%-80% |
Extrusion Rate(ml/min) |
440 ml/min |
Working Temperate(℃) |
-20 - 60℃ |
Surface Drying Time(S) |
30 S |
Full Cure Time(Hours) |
24 Hours |
Shelf Life(Month) |
12 Months |