01
Outdoor special advertisement fast dry hard transparent Nail Free Glue
Features
• Heat resistant
• Ultra fast dry
• Harder and stronger
• Super adhesion, bearing capacity 35KG/CM²
• Toluene free, more environmentally
Using method
1. Clean the surface and make sure there's no oil stains and ash left.
2.Cut open the orifice and fit the nozzle on squeeze the adhesive out with a gears.
2.1-Bonding process for light materials
(Applicable to light materials and bonding places with light bearing pressure) Squeeze the adhesive out and gelatinize in a"Z"shape with a 40cm distance press the materials tightly and then take them apart for several minutes and squeeze them again.
2.2-Bonding process for heavy materials
Squeeze the adhesive out and gelatinize as described above then fix with clamp,iron nails, screws and other instruments; remove the clamp after adhesive dried(about24 hours). Sticking positions can be adjusted within20 min, adhesiveness will be stronger after 2-3days optimum efficiency will be achieved after 7 days.
Notice
1.Nails free glue can be removed by turpentine.
2.After dry, residue can be removed by scraper.
3.This product can be used in floor laying.
4.Bonding strength will be weakened at high temperature.(Avoid bonding metal exposed in sunlight for long time)
WARNING
1.Application should be at a well-ventilated place.
2.Stay away from fire or high temperature,products should be stored at a cool and dry place.
3.Pay attention to cause water source pollution.
4.Discard the products only when it dries out.
Packing
• 300ml/piece, 24pieces/carton,43mm bottle diameter
• 310ml/piece, 24pieces/carton,45mm bottle diameter
Storage
•Store cartridge in dry and cool place.
Color
Transparent
Shelf life
• 18 months
1、Advertisement
2、Steel bonding
3、Wood work
4、Exterior decoration
CAS NO. |
216597-12-5 |
Other name |
Construction Adhesive/Nail free glue/ No more nail |
Density |
0.97g/ml |
Hardness (HB) |
68 HB |
Viscosity(MPa.s) |
69000 MPa.s |
Peel strength (N) |
103.5 N |
Shear strength (MPa) |
1.112 MPa |
Solid Content (%) |
77%-80% |
Extrusion Rate(ml/min) |
455 ml/min |
Working Temperate(℃) |
-20 - 100℃ |
Surface Drying Time(S) |
15 S |
Full Cure Time(Hours) |
24 Hours |
Shelf Life(Month) |
18 Months |